Global Sulphur regulations / ECA / SECA ZonesShipping Insight
Global Sulphur Regulations
As of 1st January 2020, International Maritime Organization (IMO) enforced the Sulphur Emission Regulations which requires that all ships shall reduce their Sulphur emissions from 3,5 % to 0,5% in all of the world's sea.
The implementation of the global 0.50% sulphur limit has not changed the requirements applicable in the four ECAs designated under Regulation 14 of MARPOL Annex VI. So in the North American, US Caribbean, North Sea and Baltic 0,10% sulphur limit continue to apply.
Introduced their own domestic ECA regulations requires max 0,50 % sulphur content in September 2015. In November 2018 a new Coastal ECA was introduced which includes all sea areas and ports within China’s territorial sea including the province of Hainan and two inland ECAs being parts of the Yangtze and the Xi Jiang River. Ships must currently use fuel with a 0.5% sulphur content limit when entering into the ECA.
The three ECAs are the Pearl River Delta, the Yangtze River Delta and Bohai Bay.
Inland ECA regulations requires max 0,10 % Sulphur content and include the navigable waters of the Yangtze River and the main lines (from Shuifu in Yunnan Province to Liuhe Estuary in Jiangsu Province) and the Xijiang River main lines (from Nanning in Guangxi Province to Zhaoqing in Guangdong Province).
From 1 September 2020, all vessels berthing or at anchorage in the Korean ECAs must burn fuel with a maximum sulphur content of 0.10%. The Korean ECAs cover Korea’s five major port areas: Incheon, Pyeongtaek-Dangjin, Yeosu-Gwangyang, Busan and Ulsan.
From 1st of January 2020 the sulphur content of fuel used for propulsion or operation onboard a vessel must not exceed 0,50 %. Local regulation enforce 0.10% to cruise ships in Sydney harbour. Regulation 4 also applies and EGCS can be used as an alternative means of compliance if at least as effective in terms of SOx emissions reduction as the fuel sulphur limit.
EU’s Sulphur Directive says all ships berthing inside a EU ports have to use marine fuels with a sulphur content not exceeding 0,10%. If they arrive at a berth with fuel oil onboard with a higher sulphur content the vessel need to start a fuel changeover operation as soon as possible after arrival at a berth and as late as possible before departure.
From the 1st of January 2020, the sulphur content was reduced to 0,10 % in Icelandic territorial waters – along with fjords and bays . Vessels will be banned from using heavy fuel within Icelandic territorial waters unless employing authorised methods to reduce sulphur dioxide emissions.
From the 1 March 2019, the Norwegian world heritage fjord area, including the Nærøyfjord, Aurlandsfjord, Geirangerfjord, Sunnylvsfjord and Tafjord in Western Norway, were included in the ECA 0.10% sulphur limit.
From the 1st of January 2020 Norway adopts to the EU’s Sulphur Directive (0,10 % Sulphur content) and all ships berthing inside a Norwegian port have to use marine fuels with a sulphur content not exceeding 0,10%. The Norwegian environmental instruction also states that as a minimum the vessels need to document they comply with operational and technical measures for reducing particle matter emissions and visible smoke, and speed as a measure for reducing emissions and discharges.
January 1, 2020, when the limit will be reduced to 0,50%. The Irish Seas exemption from the EU Sulphur Directive comes to an end, January 2020 and from the 1st of January 2020 the Irish Sea will be included in the EU Directive and limit the vessels trading in this area reducing the Sulphur content to 0,10%.
Has its own Sulphur emission regulations, thus aligned with the regulations in EU ports (sulphur content not exceeding 0,10 %) for all ships berthing in Turkish ports or operation in Turkish inland waterways. The regulations do not apply for vessels transits in Bosporus and Dardanelles and the Marmara Sea unless these vessels in transit have anchored in the area for more than 2 hours.
A "new" industry is about to grow
There are a "new" industry growing up due to these relatively new environmental requirements in the maritime industry discussing how to comply with these environmental regulations:
- Using low-sulphur distillates (low-sulphur version of marine gas oil, MGO etc)
- Using other new low-sulphur variants, such as low-sulphur heavy fuel oil (HFO) or hybrid blends
- Continue using conventional, high-sulphur (3.5%-S) HFO with exhaust gas cleaning technology (scrubbers)
- Using LNG as a fuel source
- Using another type of alternative fuel, such as methanol or hydrogen (fuel cells)
- Using renewable power generation as a supplementary method (solar, wind)
You will find the ECA layers in the Maritime Optima application. Soon you will also find the local / domestic ECA regulations in the maps. You can select and de-select layers as you like in Maritime Optima.